Lexus CT200h Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
193 Posts
Discussion Starter · #1 ·
So the CT200h will be running a 5x100 pitch circle diameter setup or basically the wheel's bolt hole spacing between the 5 lugs.

My current IS300 runs a 5x114.3 PCD and I have a gorgeous set of Volk Racing RE30 forged lightweight wheels in an awesome Formula Silver colour I'd want to swap over to the CT200h when I get it.

Has anyone used the wheel spacers that change the wheel's bolt pattern from 5x100 to 5x114.3?
 

·
Registered
Joined
·
11 Posts
See no problem why this shouldnt work.
Many nissan 200sx s13 here in sweden have these spacers on so they cant put s14 or skyline wheels on their cars.
But me personally no.
Just remember that the et on the rim will be changed and the wheel will come out a bit, but I guess you know this...
 

·
Registered
Joined
·
11 Posts
So the CT200h will be running a 5x100 pitch circle diameter setup or basically the wheel's bolt hole spacing between the 5 lugs.

My current IS300 runs a 5x114.3 PCD and I have a gorgeous set of Volk Racing RE30 forged lightweight wheels in an awesome Formula Silver colour I'd want to swap over to the CT200h when I get it.

Has anyone used the wheel spacers that change the wheel's bolt pattern from 5x100 to 5x114.3?
what size are your rims? Do you think 18"´s will fit?
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #5 ·
ya. 18"s should fit no problem.

I think OE offset will be +50mm
 

·
Registered
Joined
·
11 Posts
Aha, so it´s calle OE in english?
Sorry my bad... :p

Hmm +50mm, maybe my Skyline-wheels will fit with an adapter for the bolt pattern! :D I think they are +32mm, then add the adapter, maybe you can order +30 for the adapter to make the wheel come out a bit...
Think I got it right?
 

·
Premium Member
Joined
·
661 Posts
I am looking at doing the same, except using older wheels from IS300 as winters. A spacer/adapter could be used but is there any concern about the safety?

If will be 17" 17x7, with same tire size, but as pointed out earlier bolt pattern on IS300 is 5x114.3 where as it is 5x100 on the CT. If so what size spacer
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #8 ·
darkride. I was going to go this route, but then decided to get proper wheels. If you did do this spacer, the spacer would add about 22mm to the offset outwards.

Are you on the my.is forums Canadian section?
 

·
Premium Member
Joined
·
661 Posts
Alright thanks, well I still have some time to decide, before I have to put Winters on the CT. You know I am Canadian when I'm already worrying about Winter tires before I have the car.

Yes I am also on the Canadian Section, Ltune300, and i know who you are already considering the #23 Race car hehe
 

·
Registered
Joined
·
199 Posts
There are plenty of 5x100 wheels out there to choose from, many that aren't very expensive either.

Offset is closer to +45 though.
 
1 - 10 of 10 Posts
Top