Lexus CT200h Forums banner

Installed Slim HID Kit (w/pics)

72051 Views 162 Replies 47 Participants Last post by  Vester72
I decided to just install an aftermarket HID Kit into my ct200h


Package Content

-2 Slim Ballast
-2 6000k H11 Bulbs
-2 Metal Mounting Plates
-6 Screws and Nuts

Time to install: 30mins -1.5hrs


***PLEASE READ*** REGARDING POLARITY!
Red wire (Xenon Kit) ---> Purple wire (
Harness for OEM bulb)
Black wire (Xenon Kit) ---> White/black wire (Harness for OEM bulb)




Installed the mounting plates




Driver side was mounted on a screw holding the fuse box directly behind the driver side headlight






Passenger side will be mounted by the container that holds the pink liquid. You can unbolt the 2 screws that hold the container to tuck the wires behind (underneath) the containers (shown in the second pictured below)






Night time view






Daytime picture





Cutoff



Overall, satisfied with a $60 kit with lifetime warranty on both bulbs and ballast. Although, the periphery illuminance could be better, $60 versus $1200 LED option justifies, in my opinion, the reduced performance.



Other Members Kits


jblack - DDM Raptor 4500k
See less See more
11
1 - 1 of 163 Posts
Although, the periphery illuminance could be better, $60 versus $1200 LED option justifies, in my opinion, the reduced performance.
Nice job!!! Can you talk more about the peripheral illumination?

How would you say it compares to the stock bulbs? Is there something about this kit, which is not allowing it to act like the OEM halogens?

Congrats again!
1 - 1 of 163 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top