[bondguy]

I had a 2011 Toyota Sienna rental a couple of months before I got the CT200h. The homelink in that vehicle worked by pushing buttons 1 and 3 (two outside buttons to reset)...my garage door opener in my garage is a rolling code Liftmaster...I just push the button inside the overhead unit and you are supposed to just push the button in the vehicle and it blinks fast until it finds the correct code and then when it does, it should blink the overhead light in the garage to let you know it found the proper code. Having problems on how to use the Homelink in the CT...any help would be apprciated...Heck, I just setup my Bluetooth connectivity today with my Iphone...works great.

 

[dkid]

Try this link and start on page 451.

http://drivers.lexus.com/t3Portal/document/om/OM76004U/pdf/sec_03-07.pdf

If the link doesn't work, it is page 451 in your owners manual.

 

[bondguy]

Try this link and start on page 451.

http://drivers.lexus.com/t3Portal/document/om/OM76004U/pdf/sec_03-07.pdf

If the link doesn't work, it is page 451 in your owners manual.

Thanks...got it...I have one with rolling codes and was probably doing something wrong. Problem solved...thanks.

 

[jimmyc13]

You all set then bondguy? After you do the procedure w/ the transmitter, you then need to use the learn button on the opener motor itself.

 

[allensmith]

I am trying to rekey my driver side lock which got damaged. The problem is that the face plate cannot be removed without damaging the new lock.My friend told me to get a "disassembled lock" from the dealer. So I went down to the dealership but they don't sell the driver side lock disassembled. They also cannot remove the metal faceplate.Then my mother suggest me to contact Parkland Locksmith and really they are awesome and provide me best service.