Lexus CT200h Forums banner

Escort 8500ci Plus and Vais Tech ML+ install questions

3493 Views 2 Replies 3 Participants Last post by  Sca1079
Good morning fellow CT drivers. I am having my first modifications to my beautiful new car done on friday and I had some questions for the experts around this forum. First thing I am having installed is the Escort 8500ci Plus radar detector with the laser shifters. For the install, I was thinking about having the display/controller installed into the center console storage area (I guess that is what its called) and to have the bi-color LED installed into one of the unused blanks underneath the side mirror controls. What does everyone think about that?

As for the Vais Tech ML+, that is a little trickier. I want to have the unit at a location that I can get to easily instead of behind the monitor, such as under the seat. However, I dont receive the unit until tomorrow and I do not know how long the harness is. I wanted to do that so that I could easily change out cords for inputs. Also, the unit comes with a USB extender. I hate removing the functionality of the installed USB cord, so I was thinking I could run the installed USB cord to the Vais Tech unit instead of to its original input location. That would keep the clean look and function of the car. That way I could unplug the Apple Component Cable which will take up the USB input of the Vais Tech unit and plug in the original USB cord if need be. Confused yet? Haha

What does everybody think? Are these installations possible? Any advice on how to do it or on alternative installations?

Any and all help is appreciated!
1 - 3 of 3 Posts
I have a 9500i and just purchased the hardwire kit with mute button from Best Buy. I too want to put the mute button in the blank next to the side mirror defroster button, but haven't yet received my kit. I don't know that the mute button is going to fit thru the FRONT of the blank/opening and I really am not brave enough to remove the dash to insert it from behind.

Let's share our thoughts!
Good morning fellow CT drivers. I am having my first modifications to my beautiful new car done on friday and I had some questions for the experts around this forum. First thing I am having installed is the Escort 8500ci Plus radar detector with the laser shifters. For the install, I was thinking about having the display/controller installed into the center console storage area (I guess that is what its called) and to have the bi-color LED installed into one of the unused blanks underneath the side mirror controls. What does everyone think about that?

As for the Vais Tech ML+, that is a little trickier. I want to have the unit at a location that I can get to easily instead of behind the monitor, such as under the seat. However, I dont receive the unit until tomorrow and I do not know how long the harness is. I wanted to do that so that I could easily change out cords for inputs. Also, the unit comes with a USB extender. I hate removing the functionality of the installed USB cord, so I was thinking I could run the installed USB cord to the Vais Tech unit instead of to its original input location. That would keep the clean look and function of the car. That way I could unplug the Apple Component Cable which will take up the USB input of the Vais Tech unit and plug in the original USB cord if need be. Confused yet? Haha

What does everybody think? Are these installations possible? Any advice on how to do it or on alternative installations?

Any and all help is appreciated!

sounds awesome.. did you get it to install? I've been searching this forum and the clublexus forums and haven't heard about anyone else installing it on the ct yet.. curious to know how it all went down!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top