Lexus CT200h Forums banner

Dash Speaker Installation

10K views 5 replies 3 participants last post by  Dc5nomore 
#1 · (Edited)
6 Speaker Base.

Easy upgrade - just replace dash speakers.

Lots of pictures and discussion elsewhere so I won't repeat. Adding a simple diagram to sum up what I did.



EDIT: Please DO NOT USE wire taps or Scotchloks or T Taps or whatever. They are bad. I went back and reused the connectors on the original speakers. If I didn't have that I would have soldered the connections.
 

Attachments

See less See more
2
#3 ·
I installed Infinity Reference 3002cf speakers.

Some confusion regarding the use of the included 100uF capacitor. It's meant to be used if you are sending a full signal to the speaker. However, our HU already does some kind of filtering, HPF or crossover so no need to use this. If you end up installing an amp like some people do and don't use a crossover to the front then you need to use the capacitor.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top