Thanks to Jae Borce from the Facebook CT groups, we managed to use..
Modifications:
18x9.5 +40 TE37SL
17x9.5 +40 TE37
- Scion TC (11-15?) TRD Calipers (StopTech ST41)
- PTR0952092 - TRD Rotor, Left (340mm x25mm)
- PTR0952093 - TRD Rotor, Right (340mm x 25mm)
- PTR0921111RU - TRD big brake kit replacement pad (Stoptech ST-41 Brake Pads)
- 950.44029 Stoptech/Centric Stainless Steel Braided Lines (optional, highly recommended)
- M12-1.75 x 50mm 10.9 grade x4 flange/caliper bolts
- Custom "Rotor" / Hub centric rings 55mm - 62mm (~6mm height) x2
Modifications:
- Re-drill rotors from 5x114.3 to 5x100 at machine shop
- Grind down knuckle by upper caliper bolt hole
- Bend/cut/remove dust shield
- I'm using 18" wheels, 17" TE37's barely clear but it's very close, could potentially hit balance weights depending on location within the barrel
18x9.5 +40 TE37SL
17x9.5 +40 TE37