Search Results for ‘plate’

Hi all, this might be just a general questions for most used cars, however, I realized that some used CT200h, be it premium or F sports version, some of the used ones don't have front license plate shown in their pictures. I then looked at their carfax and some says damage reported for one or 2...

Hello Everybody, Just wondering if anybody has ever used a skid plate or any sort of protection used to help protect your front bumper from scraping/or just for protection? I just got a new artisan kit and would love to help it last longer with a little protection. Thanks in advance.

looking for front bracket. thanks

Anyone have info on where the 10 places inside the car to change bulbs to LED are? Also does anyone have info on what bulbs work best for the license plate. I know u have to take out a few pieces in the trunk and outer body. Thinking of just getting the eBay pieces that require just the direct...

Hi All! Due to an upcoming move and the State's requirement for a front license plate, I am looking for a new/used bracket for my 2011 CT. If anyone has one sitting around, do PM me your asking price :) Shipping to Missouri will do... Thanks!!

Takes about a minute to figure out. You will be amused. Post if you get it.

I ordered this License plate LED (18SMD) light housing replacement got the 2012 CT200h. It looks like a direct replacement for $18.99 per set from Aliexpress. Note that the same one is selling for $35 at Amazon.

Hey guys, I just purchased a 2015 CT200H with the F Sport package on it. What mount have you guys found for the front license plate (I have the F Sport grill)? I don't want to drill holes into the bumper.... Thanks!

For those who live in states with front plates required are there mounts that if you take off the front plate are there two holes in the bumper or is there something to cover them up so it looks nice. I live in Florida where no front plates are required and was wondering if I buy an out of...

Item is SOLD!!!

I ordered the "No Holes" license plate bracket and the left offset for the CT200h. I installed on my 2011 CT200h Obsidian. The installation took under an hour, but I think could be done in less than 30 minutes if you dont stop to take pictures. Due to limits on attaching pictures I created...

So I had my whole bumper redone to get rid of the dealership holes that were drilled into it to mount the lic plate mount. since i live in NJ, i need a front plate. a lot of people choose to roll with no front plate, but i don't want to give the cops to give me an excuse to pull me over and give...

Has anybody tried to swap out the rear license plate light and fog lights on the older models to the newer oem LED's the 2014 Ct comes with? I have a 2013 F Sport model and I was wondering if it was a direct swap without any mods. I tried asking my local Lexus dealer today but all they said was...

I've seen a few discussions on this that peaked my interest, so I decided to get some LED bulbs to go over my license plate and swap mine out. The results are pretty pleasing, and with really no tools required, about 10 minutes of fiddling, and $20 spent... It was totally worth it. I took...

Just installed this door inner sill plate for my 2012 Ct200h F-sport to blend in the OEM sill plate. It took about half an hour to do it and looking cool.:rolleyes: Internally Installed Door Sill Scuff Plate Pedal For Lexus CT Series CT200h...

My '13 CT came with the protection package, including the rear bumper scuff plate. I would rather not have a piece of plastic attached to the bumper that is going to put scratches in the bumper itself (dirt is bound to get underneath and rub into the paint), so I tried to heat it up and remove...

We just picked up our new CT last week. It came from out of state with a front license plate bracket installed. I ordered some bumper plugs but when I removed the bracket found that they won't work because the person that drilled it made a mess. The holes are pulled out so the plugs won't fit...

Hi Everyone, I'm thinking of getting the Gominigo 'No HOLES' Lic Plate Bracket kit which can be seen here - Lexus - GoMiniGo-Home of Innovative Products for your car The CT isn't shown but i sent them an email and they said they've fitted their kit to the CT but it's just not on the website...

......without having to drill holes in the painted bumper. My local law enforcement has become most aggresive in citing cars without front license plates (think: revenue generation). :) I found the factory provided black plastic mounting plate fits quite comfortably in the area just below the...

I had a problem with my license plate LED's not working...I put the original bulbs back temporarily until my new LED's come in the mail...and I have a problem in that they sometime don't light up...a bad connection I think...not sure if something from the LED bulbs widened the connection pins or...