Search Results for ‘fitment’

Hi all, trying to decide what rim and tyre fitment to get on my 2015 CT200H base. Car currently has the tiny 16s wheels. I feel 18s will look too big for this car and think 17s will be more practical and look closer to factory spec. i have found images of an f sport with aftermarket wheels and...

Hey guys, just picked up a 2017 CT Fsport so I'm pretty new to the game, but I'm already thinking of modifications. I plan on running the CT on some BC coilovers along with 18x9.5 +38 wheels and 225/35/18. This, of course, open to change because I'm still doing a bit more research for fitments...

I inquired recently to get the skipper lip kit for my CT200h. They responded and said its for an F-sport. Is there a difference in bumpers for the 2013 models? It looks like both should be the same. I like it since it bolts right up to the existing mounting holes on the bottom of the bumpers.

Got into a minor collision and will be replacing my 2013 bumper with the 2014-2015 bumper. Question is, does the bumper from the factory come with foglight brackets or do I need to purchase those separately? I can't seem to find a diagram of the foglight assembly

Looking to purchase some new rims today to replace my 2015 F Sport 17s. I want to use factory tires. I curious if this will fit and look right. I don't really want them to stick out at all but can handle a little bit. Any help would be great. Thanks Avid 1 AV 06 17x8 5x100 35 Hyper Black Wheels...

Hello friends, I own a 2011 CT200h in Matador Red. The car is awsome! I want to fit in some aftermarket wheels to improve its look further. I just bought a set of Toora T560 18" wheels, which have an offset of +35. Now, I am a little bit concerned about the tire size. Does it work with...

As a few of you know, I just got this set less than a few weeks ago. I work for a wheel company, so I get the luxury of swapping different wheels out and also configuring the perfect fitment . Avant Garde M240 Gloss Silver w/ Machined Lip 18x9 +38 Front 18x9 +25 Rear Falken PT-722 225/40/18...

Getting a new pair of wheels as these were mainly mounted for promotional/photography purposes. They are practically like new. Just used for light daily driving for about a month. I don't think there is any damage on it at all, no curb marks or rashes. Fitment is spot on, aggressive without any...

Hello all! I'm looking to purchase some aftermarket wheels for my CT. I'm looking for the same size as factory with a different offset to push them out alittle further for a more "flush" look. I believe the bolt pattern for the CT is 5x100, is this correct? I see a lot of places list 5x114.3 as...

I have a set of FOUR (4) 5mm hubcentric with a 54.1 bore (exact CT 200h size) in the 5x100 pattern. You can run these spacers with your OEM lug nuts as if you go any bigger you would need extended studs. These are a PERFECT fit to space out (push out) your wheels by 5mm. These WILL make your...

Hi everyone, Any thoughts on clearance on a lowered CT with coilovers with this setup? Thanks!

just got a new set of 19" rims online told by a member in here and got front: 19x8.5+45 225/35/19 rear: 19x9.5+50 245/35/19 setup but when i put the rear rims on it doens't fit.... the suspension arm a on the way of the inner rims anyone run with this spec?? right now i put the wider rims...

I was hoping we could all start sharing what setups everyone is running, as it will help others decide what kind of a setup they wish to go with. For example, I'm contemplating some 18"x8" wheels with a 35mm offset and now want to get some tires that will help me fill up the fenders a bit more...

Available in Japan now SUSTEC PRO NF?????????????TANABE ????????TANABE Model number: NNZWA10K Price 99,750 yen (95,000 without tax) Lower(mm) Front Rear 0～-47 -12～-49

So the CT200h will be running a 5x100 pitch circle diameter setup or basically the wheel's bolt hole spacing between the 5 lugs. My current IS300 runs a 5x114.3 PCD and I have a gorgeous set of Volk Racing RE30 forged lightweight wheels in an awesome Formula Silver colour I'd want to swap...