I wanted these horns to blast deers and lame drivers. Mission accomplished with these Hella horns lol. it's also helpful having super loud horns in a small car. Those big *** trucks might not see you... but now they'll def be able to hear you.
The kit comes with 2 horns and a relay. The CT doesn't need the relay so you can set it aside. This is a straight plug and play upgrade!
1.)Take off the cover thing and you can see the stock horns there. ( I have the driver side one removed already. If i recall right, it's just a 12mm socket you'll need. just start to unscrew the bolt holding it and then get your hands in there. Unplug the horn.
This is what the stock horn looks like and there is the port where you plug it in.
2.) Wire up the ground for the hella supertone: (We wrapped the other end in electrical tape later)
3.) Sandwich in the ground wire there and screw the bolt in. it might be easier to also plug in the horn before screwing it in all the way. Either way, you'll be able to plug/unplug it while its attached. It barely fit!
This is a comparison of the supertone and stock horn (Yes i know that's a bad paint job, I just used spray paint and the weather was being lame. But it's ok, you can't really see it behind the grill and i also repainted it to white.)
4.) Repeat process for the passenger side horn. Except you'll have to bend down this tab a little to make the horn fit.
5.) Honk the car to make sure they work! you can also honk 1 at a time if you'd like.
The completed product in white!