bumper protector chrome or rubber?
NEWS
 

  1. Welcome to Lexus CT200H Forums – General discussion forum for Lexus CT200h

    Welcome to Lexus CT200H Forums - a website dedicated to all things Lexus CT200h.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Lexus CT200H Forums today!
     
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: bumper protector chrome or rubber?

  1. #1
    Junior Member
    Join Date
    Dec 2011
    Posts
    15

    bumper protector chrome or rubber?

    At some point I would like to have a bumper protector put on. Does anyone have one of these to recommend? I've seen two. the factory chrome and a cheaper black rubbery one. I know I will scratch my bumper soon, so I'm getting ready to get one before/as it happens.

    Does it have any impact on where all the dirt on the car builds up? (DOes it hide it more?)

  2. Remove Advertisements
    Lexus CT200H Forum
    Advertisements
     

  3. #2
    Member coubs's Avatar
    Join Date
    Apr 2011
    Location
    Winnipeg, MB Canada
    Posts
    86
    I too have been searching for 6 months and I highly recommend doingit sooner than later. I have a few scratches - and I am insanely anal about my car! It is a tight fit to get a hockey bag in/out with the seats still up but I can and even though I "lift" the bag out - instead of dragging it out over the bumper - I still have a few scratches.
    I have been waiting for 9 months for the stainless bumper protector (from ct200hchat.com) but they changed the status from "coming soon" to "...eventually"
    I have looked online quite often and found a Lexus clear film one but now that I have some scratches I think I would most definately have air bubbles in an around the scratches and I have the Obsidian (black) color so would not look nice. There is one, I think on eBay, that is black rubber and I am almost positive I am going to get that.
    As for dirt build up - it won't matter as I have never had a vehicle that collects dirt and dust on the back glass and bumper like the CT (and most have had hatches). Again my color is black so it gets dusty minutes after washing but man is it bad on the back glass under the spoiler and on the bumper.
    2011 CT200 Obsidian, Black Nulux, Canadian Tourning Edition

  4. #3
    Senior Member
    Join Date
    Aug 2011
    Location
    Coral Gables, FL
    Posts
    185
    Quote Originally Posted by coubs View Post
    I too have been searching for 6 months and I highly recommend doingit sooner than later. I have a few scratches - and I am insanely anal about my car! It is a tight fit to get a hockey bag in/out with the seats still up but I can and even though I "lift" the bag out - instead of dragging it out over the bumper - I still have a few scratches.
    I have been waiting for 9 months for the stainless bumper protector (from ct200hchat.com) but they changed the status from "coming soon" to "...eventually"
    I have looked online quite often and found a Lexus clear film one but now that I have some scratches I think I would most definately have air bubbles in an around the scratches and I have the Obsidian (black) color so would not look nice. There is one, I think on eBay, that is black rubber and I am almost positive I am going to get that.
    As for dirt build up - it won't matter as I have never had a vehicle that collects dirt and dust on the back glass and bumper like the CT (and most have had hatches). Again my color is black so it gets dusty minutes after washing but man is it bad on the back glass under the spoiler and on the bumper.
    Is this e-bay item the same one that is still unavailable?
    LEXUS Hybrid CT200h 2011-2012 MIT Rear bumper protector step sill cover OEM | eBay

  5. #4
    Member coubs's Avatar
    Join Date
    Apr 2011
    Location
    Winnipeg, MB Canada
    Posts
    86
    Joe166: It looks like it is but it is way more than this one:
    Stainless Rear Bumper Protector Lexus CT200h | CT200h Chat
    Also is it really OEM or is it an OEM company like their description reads? It doesn't really matter to me but given the fact that they have the Lexus name mostly covered with a piece of paper (infringement violation?) makes me want to avoid this one.
    Maybe I am being too paranoid.
    2011 CT200 Obsidian, Black Nulux, Canadian Tourning Edition

  6. #5
    Senior Member
    Join Date
    Aug 2011
    Location
    Coral Gables, FL
    Posts
    185
    Quote Originally Posted by coubs View Post
    Joe166: It looks like it is but it is way more than this one:
    Stainless Rear Bumper Protector Lexus CT200h | CT200h Chat
    Also is it really OEM or is it an OEM company like their description reads? It doesn't really matter to me but given the fact that they have the Lexus name mostly covered with a piece of paper (infringement violation?) makes me want to avoid this one.
    Maybe I am being too paranoid.
    I agree with you. I wouldn't order it from them either, but if it is available there, shouldn't we expect it from someone we have heard of soon? That was my only point.

  7. #6
    Member
    Join Date
    Jun 2011
    Posts
    68
    Why not get the rear bumper applique? It doesn't detract from the rear end and provides protection at the same time. If you already have scratches, then it won't do it. Depending on the color of your car I would get the chrome for light colors and black for dark colors.

  8. #7
    Senior Member Boldlygo's Avatar
    Join Date
    May 2011
    Location
    Barrie, On
    Posts
    267
    If you go to the eBay store you will see this seller has a few different items for the CT. It also says they are 'out' right now and won't be back until the end of the month.
    I'm also interested in the rear bumper protector as I have ordered one from CT200HCHAT.com as looks like will never get it. I also like the led shift knob.
    Has anyone ordered either of these two items yet?
    2011 CT200h w/tech pkg. (Cdn)-Fire Agate Pearl/black leather; sport pedals; sills; cargo mat; wallet key; 3M "chip guard" on hood, side sills, lower door and front part of roof; PIAA Xtreme White HB (H9); Hoen Xenonmatch Fogs (H11); Putco LED map, dome, vanity, hatch & license plate lights; tinted windows (Llumar); Lexus car cover; Reflector sun shade; Michelin Primacy Alpin PA3 snow tires.

  9. #8
    Senior Member
    Join Date
    Aug 2011
    Location
    Coral Gables, FL
    Posts
    185
    Quote Originally Posted by exbauer View Post
    Why not get the rear bumper applique? It doesn't detract from the rear end and provides protection at the same time. If you already have scratches, then it won't do it. Depending on the color of your car I would get the chrome for light colors and black for dark colors.
    I would think that any "protection" from a decal would be minimal. I know it is a vinyl applique, but it is not all that thick (I applied one to my wife's car) and if you scratch it, you have ugly on your bumper until you replace it for the same amount. I like the look, but I don't consider it much protection. Certainly not as much as the metal one, obviously.

  10. #9
    Junior Member
    Join Date
    Dec 2011
    Posts
    15
    I saw that LED knob too and thought it looked cool. But does it need to be plugged in all the time or is that cig lighter connector just to charge the battery?

  11. #10
    Member coubs's Avatar
    Join Date
    Apr 2011
    Location
    Winnipeg, MB Canada
    Posts
    86
    I think it is just to charge it -I wonder if we can get a group buy?
    2011 CT200 Obsidian, Black Nulux, Canadian Tourning Edition

  12. Remove Advertisements
    Lexus CT200H Forum
    Advertisements
     

Quick Reply Quick Reply

Register Now

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Similar Threads

  1. Lower side chrome moulding?
    By corrado_mr2 in forum Lexus CT200h General Discussion Forum
    Replies: 18
    Last Post: 10-11-2011, 04:14 PM
  2. Installed my own side chrome molding
    By corrado_mr2 in forum Lexus CT200h General Discussion Forum
    Replies: 5
    Last Post: 09-25-2011, 04:57 PM
  3. Exterior, chrome kit. Opinions?
    By SID in forum Lexus CT200h Appearance and Body
    Replies: 21
    Last Post: 09-16-2011, 12:08 AM
  4. Are you waiting for lower body mouldings and stainless steel bumper protector?
    By Chunky1234 in forum Lexus CT200h Appearance and Body
    Replies: 25
    Last Post: 06-09-2011, 11:40 PM
  5. Ordered Bamboo Insert and Metal Rear Bumper Protector
    By bondguy in forum Lexus CT200h General Discussion Forum
    Replies: 4
    Last Post: 05-17-2011, 05:33 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBadvanced CMPS v4.1.2